Why WE
Installations
Equipment Installations
Conveyor Installation
Laser Alignment & Digital Layout
Service & Maintenance
Fabrication
Structural Fabrication
Clean Design
Clients
Documents
Toolbox Talk
Operators Daily Checklist Form
Employee Reimbursement Form
Jobs Safety Analysis Form
Safety Blitz Form
Lift Plan Form
Safety
Rentals
Contact
Contact
Blog/News
Account
Login
Lift Plan Form
Westmont Engineering Lift Plan
Date
(Required)
Month
Day
Year
Job #:
(Required)
Job Site:
(Required)
Time
(Required)
Hours
:
Minutes
AM
PM
AM/PM
Completed By (Competent Person)
(Required)
Project Manager
(Required)
Please Select
Charles
Dan
John
Mike G
Tim
Mike R
Note:
Applies to Cranes, Hoists ,Power-Operated equipment , Forklifts , Telehandlers , etc. that can be used to hoist, lower and/or horizontally move a suspended load.
General Considerations / Area Preparation: 1926.1402
1. Is the lift(s) within the rated capacities? (based on boom height, radius)
(Required)
Yes
No
N/A
2. Boom deflections considered?
(Required)
Yes
No
N/A
3. Have all potential obstructions been identified?
(Required)
Yes
No
N/A
4. Have environmental considerations been addressed? (wind, weather, lightning)
(Required)
Yes
No
N/A
5. Have electrical hazards been addressed (overhead /underground)
- Minimum Approach Distances established?
(Required)
Yes
No
N/A
- Spotter required?
(Required)
Yes
No
N/A
- Utilities located?
(Required)
Yes
No
N/A
6. Swing radius properly barricaded and personnel advised of hazards? 1926.1424
(Required)
Yes
No
N/A
7. Consideration given for no-load travel near energized equipment? 1926.1411
(Required)
Yes
No
N/A
8. The locations for the load landings has been selected and prepared?
(Required)
Yes
No
N/A
9. Blocking and/or cribbing available to set the loads on?
(Required)
Yes
No
N/A
10. Travel paths have been determined and cordoned off?
(Required)
Yes
No
N/A
11. Have ground bearing support questions been addressed?
(Required)
Yes
No
N/A
12. Other personnel in the area have been notified of the lifts?
(Required)
Yes
No
N/A
Considerations:
1. Weights and Centers of Gravity (COG) have been determined?
(Required)
Yes
No
N/A
2. Anything inside/outside the loads that could shift during the lift?
(Required)
Yes
No
N/A
3. Does rigging need protection from the loads?
(Required)
Yes
No
N/A
4. All anchor bolts, hold-downs, or fasteners have been removed?
(Required)
Yes
No
N/A
5. Potential for binding: are load cells required to verify the loads are free?
(Required)
Yes
No
N/A
6. Attachment points rated to take load weight?
(Required)
Yes
No
N/A
7. Are the loads structurally capable of being lifted? (bending/twisting issues)
(Required)
Yes
No
N/A
8. Crane assembly in accordance with the Manufacturer's requirements. 1926.1403
(Required)
Yes
No
N/A
9. Post assembly and Shift Inspection completed? 1926.1412
(Required)
Yes
No
N/A
10. Safety Devices and Operational Aids are present and functioning? 1926.1415 / 1926.1416
(Required)
Yes
No
N/A
11. Is a Critical Lift Plan required?
(Required)
Yes
No
N/A
Comments:
Rigging:
1. All rigging has been inspected by a Qualified Rigger? 1926.1413 / 1926.1414
(Required)
Yes
No
N/A
2. Have sling angles been calculated?
(Required)
Yes
No
N/A
3. Are shackles correctly sized for the sling eyes?
(Required)
Yes
No
N/A
4. Are softeners needed?
(Required)
Yes
No
N/A
Comments:
Personnel:
1. The roles, responsibilities and qualifications for personnel have been defined?
- (Operator, Lift Supervisor, Rigger, Signal Person)
(Required)
Yes
No
N/A
3. Personnel trained per the EM?
(Required)
Yes
No
N/A
2. A Pre-Lift meeting has been conducted?
(Required)
Yes
No
N/A
Comments:
Additional Information:
Operator:
Date
MM slash DD slash YYYY
Rigger(s):
Date
MM slash DD slash YYYY
Signal Person:
Date
MM slash DD slash YYYY
Other:
Date
MM slash DD slash YYYY
Send Form to Client?
(Required)
Yes
No
Client Name
First
Last
Client Email
Lift Plan Drawing
Clear
Undo
Color:
Size:
Upload or Take a Photo
You can upload an image from your device or take a photo with your camera.
📷
Choose Photo or Take Picture
Remove
Δ
